Alcatel-Lucent 7210 SAS-D User Manual

Global Commands
Page 60 7210 SAS D, E, K OS Basic System Configuration Guide
64 bytes from 192.xxx.xxx.xxx: icmp_seq=4 ttl=64 time<10ms.
64 bytes from 192.xxx.xxx.xxx: icmp_seq=5 ttl=64 time<10ms.
---- 192.xxx.xxx.xxx PING Statistics ----
5 packets transmitted, 5 packets received, 0.00% packet loss
round-trip min < 10ms, avg < 10ms, max < 10ms, stddev < 10ms
*A:ALU-7210#
ttl time-to-live — The IP Time To Live (TTL) value to include in the ping request, expressed as a
decimal integer.
Values 0 —128
tos type-of-service — The type-of-service (TOS) bits in the IP header of the ping packets, expressed
as a decimal integer.
Values 0 — 255
size bytes — The size in bytes of the ping request packets.
Default 56 bytes (actually 64 bytes because 8 bytes of ICMP header data are added to the
packet)
Values 0 — 65507
pattern pattern — A 16-bit pattern string to include in the ping packet, expressed as a decimal
integer.
Values 0 — 65535
source ip-address — The source IP address to use in the ping requests in dotted decimal notation.
Default The IP address of the egress IP interface.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:x:x [-interface]
x:x:x:x:x:x:d.d.d.d
x: 0 — FFFF H
d: 0 — 255 D
interval seconds — The interval in seconds between consecutive ping requests, expressed as a
decimal integer.
Default 1
Values 1 — 10000
next-hop ip-address — This option disregards the routing table and will send this packet to the
specified next hop address. This address must be on an adjacent router that is attached to a subnet
that is common between this and the next-hop router.
Default Per the routing table.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface interface-name — Specify the interface name.

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English