Root Commands
7210 SAS D, E, K OS Basic System Configuration Guide Page 61
bypass-routing — Send the ping request to a host on a directly attached network bypassing the
routing table. The host must be on a directly attached network or an error is returned.
count requests — The number of ping requests to send to the remote host, expressed as a decimal
integer.
Default 5
Values 1 — 10000
do-not-fragment — Specifies that the request frame should not be fragmented. This option is
particularly useful in combination with the size parameter for maximum MTU determination.
router router-instance — Specify the router name or service ID.
Default Base
Values router-name: Base, management
service-id: 1 — 2147483647
timeout timeout — Specify the timeout in seconds.
Default 5
Values 1 — 10
service-name service-name — Specifies a unique service name to identify the service.
Values [64 chars max]
pwc
Syntax pwc [previous]
Context <GLOBAL>
Description This command displays the present or previous working context of the CLI session. The pwc com-
mand provides a user who is in the process of dynamically configuring a chassis a way to display the
current or previous working context of the CLI session. The pwc command displays a list of the CLI
nodes that hierarchically define the current context of the CLI instance of the user. For example:
A:Dut-G>config>service>vpls# pwc
-------------------------------------------------------------------------------
Present Working Context :
-------------------------------------------------------------------------------
<root>
configure
service
vpls 1
-------------------------------------------------------------------------------
A:Dut-G>config>service>vpls#
When the previous keyword is specified, the previous context displays. This is the context entered by
the CLI parser upon execution of the exit command. The current context of the CLI is not affected by
the pwc command.
Parameters previous — Specifies to display the previous present working context.
To Next Page
Loading...
Need help?
General
