Alcatel-Lucent 7705 - Establishing Router Management Connections; Console Connection; Table 28 Console Port Default Settings; Figure 33 Console Port Connection

Initializing and Provisioning
7705 SAR-M Chassis Installation Guide 139
Establishing Router Management Connections
There are two ways to access management of the 7705 SAR-M:
• Console connection
• Telnet connection
Console Connection
The Console port on the front of the 7705 SAR-M is a female RJ-45 connector (see
Figure 33). To establish a console connection, you need the following:
• an ASCII terminal or a PC running terminal emulation software set to the parameters
shown in Table 28
• a shielded RJ-45 CAT5E cable
Shielded cable must be used to maintain EMC compliance.
Figure 33: Console Port Connection
Table 28: Console Port Default Settings
Parameter Value
Gender DCE
Baud Rate 115 200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
Crit.
7705 SAR-M
Maj.
Min.
Stat
ACO/
LT
External Alarms
Max, 50 mA
-48/+24 VDC
Mgmt
To D
Lnk Act
Sync In
Sync Out
1
T1/E1 Ports
Stat
3
Stat
5
Stat
7
Stat
9
Stat
11
Stat
13
Stat
15
Stat
2 16
BATT A
BATT B
+Batt A -Batt A +Batt B -Batt B
Console
Link
Act
7
Link
Act
6
Link
Act
5
4321
Link
Act
Link
Act
Link
Act
Link
Act
21113
Console port