Alcatel-Lucent 7705 - Removing the Fan Module

7705 SAR-M Connectors and LEDs (Variants with Module Slot, Actively Cooled)
146 7705 SAR-M Chassis Installation Guide
7705 SAR-M Connectors and LEDs (Variants with
Module Slot, Actively Cooled)
Figure 35 identifies the connectors and LEDs on the front of the router.
Figure 35: 7705 SAR-M Connectors and LEDs
Table 30 describes the connectors and LEDs on the 7705 SAR-M variants that have a module
slot and that are actively cooled.
Crit.
7705 SAR-M
Maj.
Min.
Stat
ACO/
LT
External Alarms
Max, 50 mA
-48/+24 VDC
Mgmt
To D
Lnk Act
Sync In
Sync Out
1
T1/E1 Ports
Stat
3
Stat
5
Stat
7
Stat
9
Stat
11
Stat
13
Stat
15
Stat
2 16
BATT A
BATT B
+Batt A -Batt A +Batt B -Batt B
Console
Link
Act
7
Link
Act
6
Link
Act
5
4321
Link
Act
Link
Act
Link
Act
Link
Act
21118
1121 16144 6
158753 9 10 12 13
Table 30: 7705 SAR-M Connector and LED Descriptions
Key Label/Part Sub-
category
Description
1 Anti-static
Wrist-strap
Connector
Connector The wrist-strap connector is a banana jack receptacle that provides a
grounding point for personnel working on the 7705 SAR-M.
2 Module Slot Slot The module slot provides the capability for additional network interfaces.
All modules have a power LED and a status LED; see Table 31 for
descriptions.