Mandatory Regulations
7705 SAR-M Chassis Installation Guide 45
NRTL
This equipment is certified by the NRTL as meeting the requirements of UL 60950-1, Safety
of Information Technology Equipment.
NRTL Approval for External DC Supplies
When the system is equipped with an AC rectifier, the rectifier must have NRTL-accredited
approval. In addition, the DC outputs must meet UL 60950-1 SELV requirements.
Safety Approval for DC Systems
The DC source for the equipment must meet the requirements of a SELV source in
accordance with UL 60950-1. You must use the equipment with a SELV secondary source
that is electrically isolated from the AC source and that is reliably grounded.
Food and Drug Administration
This product complies with 21 CFR 1040.10 and 1040.11 regulations, which govern the safe
use of lasers. Only qualified service personnel, thoroughly familiar with laser radiation
hazards, should install or remove the fiber-optic cables used in this system. You can find
information about the safe use of lasers in ANSI Z 136.1: Safe Use of Lasers and ANSI Z
136.2: Safe Use of Lasers in Optical Fiber Communications Systems. You can obtain these
documents and other instructional material from:
Laser Institute of America
13501 Ingenuity Drive, Suite 128
Orlando, FL 32826
http://www.laserinstitute.org
To Next Page
Loading...
