Installing the Chassis
7705 SAR-M Chassis Installation Guide 85
Figure 17 displays the components of a packed 7705 SAR-M chassis. Table 13 lists the
7705 SAR-M packing components.
Figure 17: Unpacking the 7705 SAR-M Chassis
To unpack the chassis, open the carton and follow these steps:
Step 1. Carefully lift the router out of the carton and place it on a flat surface.
Step 2. Remove the package foam tray.
Step 3. Remove the protective anti-static wrapping when you are ready to install the router.
Table 13: 7705 SAR-M Packing Components
Key Description
1 Shipping container
2 7705 SAR-M chassis (wrapped in an anti-static bag)
3 Package foam tray
1
22716
2
3
Note: Wear an anti-static wrist strap when unpacking the chassis to prevent damage to the
equipment due to ESD.
To Next Page
Loading...
