Initializing and Provisioning
7705 SAR-M Chassis Installation Guide 141
Running Telnet
After the Ethernet Management port IP address is configured, the 7705 SAR-M CLI can be
accessed with a Telnet connection. To establish a Telnet connection, run a Telnet program
and issue the telnet command, followed by the Management port IP address.
The following displays an example of a Telnet login:
C:\>telnet 192.168.1.xx1
Login: admin
Password: ########
ALU-1#
The default login is admin.
The default password is admin.
To Next Page
Loading...
