7705 SAR-M Chassis Installation Guide 169
Standards and Protocol Support
Safety
AS/NZS 60950-1—Safety of information technology equipment
including electrical business equipment
CSA 60950-1-07—Information Technology Equipment - Safety -
Part 1: General Requirements (Bi-National standard, with
UL 60950-1)
EN 60950-1:2006—Information technology equipment. Safety.
General requirements
FDA CDRH 21-CFR 1040—PART 1040 Performance Standards
for Light-Emitting Products
IEC 60825-1—Safety of laser products - Part 1: Equipment
Classification and Requirements
IEC 60825-2—Safety of laser products - Part 2: Safety of optical
fibre communication systems (OFCS)
IEC 60950-1—Information technology equipment - Safety - Part 1:
General requirements
UL 60950-1—UL Standard for Safety of Information Technology
Equipment
EMC Compliance
AS/NZS CISPR 22:2006 (Class A)—Information technology
equipment - Radio disturbance characteristics - Limits and
methods of measurement
CISPR 22:2005 + A1:2006 (Class A)—Information technology
equipment - Radio disturbance characteristics - Limits and
methods of measurement
EN55022 2006 + A1:2007 (Class A)—Information technology
equipment - Radio disturbance characteristics - Limits and
methods of measurement
EN 300 386 v1.5.1 (Class A)—Electromagnetic Compatibility and
Radio Spectrum Matters (ERM); Telecommunication
network equipment; ElectroMagnetic Compatibility
(EMC) requirements
FCC Part 15 – 2008 (Class A)— “RADIO FREQUENCY
DEVICES”, Code of Federal Regulations, Title 47 --
Telecommunication, Chapter I – Federal Communications
Commission, Part 15 – Radio Frequency Devices,
47CFR15
ICES-003 Issue 4 (Class A)—Spectrum Management and
telecommunications Policy- Interference- Causing
Equipment Standard - Digital Apparatus
ITU-T K.20-2008/04 (Enhanced)—Resistibility of
Telecommunication Equipment Installed in a
Telecommunications Centre to Overvoltages and
Overcurrents
ITU-T K.44—Resistibility for Telecommunication Equipment
Exposed to Overvoltages and Overcurrents
Environmental Compliance
ATT-TP-76200 Issue 16a—Network Equipment Power, Grounding,
Environmental, and Physical Design Requirements
ETSI EN 300 019-2-1 v2.1.2 (Class 1.2)—Environmental
Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment;
Part 2-1: Specification of environmental tests; Storage
ETSI EN 300 019-2-2 v2.1.2 (Class 2.3)—Environmental
Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment;
Part 2-2: Specification of environmental tests;
Transportation
ETSI EN 300 019-2-3 v2.2.2 (Class 3.2)—Environmental
Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment;
Part 2-3: Specification of environmental tests; Stationary
use at weather protected locations
ETSI EN 300 132-2 V2.3.6—Power Supply Interface at the input to
telecommunication equipment; Part 2: operated by direct
current
ETSI 300 753 v1.2.1 (Class 3.2)—Equipment Engineering (EE);
Acoustic noise emitted by telecommunications equipment
Telcordia GR-63-CORE Issue 3—NEBS Requirements: Physical
Protection
Telcordia GR-1089-CORE Issue 6—Electromagnetic Compatibility
(EMC) and Electrical Safety – Generic Criteria for
Network Telecommunications Equipment
Verizon VZ-TPR-9305 Issue 4—Verizon NEBSTM Compliance:
NEBS Compliance Clarification Document Verizon
Technical Purchasing Requirements
To Next Page
Loading...
