Chassis Ground Wiring
92 7705 SAR-M Chassis Installation Guide
Step 5. Use a cable tie to secure the ground wire to the lance on the mounting bracket. The
lug will be below the lance if the ground cable is routed downward. The lug will be
above the lance if the ground cable is routed upward.
Step 6. Connect the opposite end of the ground wire to the appropriate ground point at your
installation site. Ensure that the chassis ground connection is made according to
local safety codes.
Step 7. Connect the 7705 SAR-M to the DC or AC power source. See DC Power
Connections or AC Power Connections.
To Next Page
Loading...
