Alcatel-Lucent 7705 - Installing a Distribution Panel in a Rack; Rack-Mounting a Distribution Panel

Installing the Components
7705 SAR-8 Installation Guide Page 105
Installing a Distribution Panel in a Rack
Rack-Mounting a Distribution Panel
The distribution panels are designed for installation in a 19-inch rack. Figure 29 illustrates
the installation of a distribution panel.
Danger: Only trained and qualified personnel should install or replace this equipment.
Caution: When rack-mounting the distribution panel in an equipment rack, do not stack
another panel or any other equipment directly on top of the panel. Each panel must be
secured in the rack with the appropriate mounting apparatus.
Note: There should be at least 1 RU of space above and/or below the 7705 SAR-8 to run
cables from the faceplate connectors. It is not necessary for the space to be immediately
above or below the 7705 SAR-8.
Figure 29: Installing a Distribution Panel in a Rack
2
1
4
3
21 22
I/O
I/O
23 24
29 30
31 32
17 18
I/O
I/O
19
20
25
26
27 28
5 6
I/O
I/O
7
8
1314 15 16
12
I/O
I/O
3 4
9 10 11 12
19605