Alcatel-Lucent 7705 - Table 15: Unpacking the 7705 SAR-8 Chassis; Figure 18: Unpacking the 7705 SAR-8 Chassis

Installing the Chassis
7705 SAR-8 Installation Guide Page 81
Figure 18 displays the components of a packed 7705 SAR-8 chassis.
To unpack the chassis, open the carton and follow these steps:
Step 1. Carefully lift the router out of the carton and place it on a flat surface.
The chassis shipping weight is approximately 10 lbs. (4.5 kg) without any
components installed.
Step 2. Remove the foam end caps on the sides of the router.
Step 3. Remove the protective anti-static wrapping when you are ready to install the router.
Figure 18: Unpacking the 7705 SAR-8 Chassis
3
1
3
2
19600
Table 15: Unpacking the 7705 SAR-8 Chassis
Key Description
1 Shipping container
2 7705 SAR-8 chassis (wrapped in an anti-static bag)
3 Foam end caps
Caution: Lift the chassis by the bottom of the chassis. Do not put your hands inside a card
slot to lift the unit.