Alcatel-Lucent 7705 - Running Telnet

Initializing and Provisioning
7705 SAR-8 Installation Guide Page 123
Running Telnet
After the IP parameters are configured, the CLI can be accessed with a Telnet connection.
To establish a Telnet connection, run a Telnet program and issue the Telnet command,
followed by the IP address.
The following displays an example of a Telnet login:
C:\>telnet 192.168.1.xx1
Login: admin
Password: ########
ALU-1#
The default login is admin.
The default password is admin.