Appendix A: Connectors and LEDs
Page 128 7705 SAR-8 Installation Guide
CSM Connectors and LEDs
Figure 37 identifies the connectors and LEDs on the CSM.
Table 29 describes the connectors and LEDs on the CSM.
Figure 37: CSM Connectors and LEDs
Stat
Mgmt Port
In Out
Sync
CSM
Pwr
Act
2 37
1
74 5 6
19647
Console
Table 29: 7705 SAR-8 CSM Connector and LED Descriptions
Key Label/Part Sub
category
Description
1Pwr — Blue: Indicates that power to the CSM is on
Unlit: Indicates that there is no power to the CSM or the power is faulty
2 Stat (Status) — Green (solid): Indicates that the CSM is operationally up and
administratively up
Green (blinking): Indicates that the CSM is initializing the system
Amber: Indicates that the CSM is operationally down but
administratively up, or that hardware is booting up
Unlit: Indicates that the CSM is operationally down and administratively
down
3 Act (Active) — Green (solid): Indicates the active CSM
Green (blinking): Indicates the standby CSM
To Next Page
Loading...
