7705 SAR-8 Overview
7705 SAR-8 Installation Guide Page 53
1.0/2.3 Mini-Coaxial Distribution Panel
Figure 11 shows the Mini-Coaxial Distribution panel. Table 3 lists the panel features. The
mini-coaxial panel provides 75-ohm E1 access for up to 32 ports. On the customer side, each
access port has separate transmit and receive 1.0/2.3 mini-coaxial, female connectors. On
the equipment side, the panel has two sets of 68-pin AMP connectors for connection to two
16-port T1/E1 ASAP cards via 68-pin AMP to 68-pin AMP T1/E1 cables (see T1/E1 Cables
on page 57). One set of AMP connectors on the panel is for network ports 1 to 16, and the
other set is for network ports 17 to 32.
Figure 10: BNC Distribution Panel
SPARE EXT/
IN/OUT 17 32
-
M4
IN/OUT 17 32
-
M2
IN/OUT
161-M3
IN/OUT
161-M1
MAIN
SPARE EXT/
MAIN
Front
Back
1
1
2
25 26 27 28 29 30 31 32161514131211109
17 18 19 20 21 22 23 2487654321
IN 25-32
OUT 25-32
IN 9 - 16
OUT 9 - 16
IN 17-24
OUT 17-24
IN 1 - 8
OUT 1 - 8
19788
Table 3: Distribution Panel Features
Key Description
1Label
2 68-pin AMP connectors
Note: A set of connectors consists of one MAIN connector and one SPARE connector. When
connecting to 16-port T1/E1 ASAP Adapter cards, always use the (bottom) connectors
labeled MAIN.
To Next Page
Loading...
