Mandatory Regulations
Page 32 7705 SAR-8 Installation Guide
Canada Regulations
This section describes the mandatory regulations that govern the installation and operation
of the 7705 SAR-8 in Canada.
Industry Canada Regulations
ICES-003: Interference-Causing Equipment Standard Digital Apparatus
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
IC CS-03: Specification for Terminal Equipment, Terminal Systems,
Network Protection Devices, Connection Arrangements and Hearing Aids
Compatibility
This product meets the applicable Industry Canada technical specifications with respect to
IC CS-03: Specification for Terminal Equipment, Terminal Systems, Network Protection
Devices, Connection Arrangements and Hearing Aids Compatibility.
Registration number: IC: 1737F-0010.
EMC Compliance
EMC compliance may require the use of ferrites, shielded cables or other special
accessories. Where required, these special accessories must be installed as per the
instructions.
Safety Approval for DC Systems
The DC source for the system must meet the requirements of a SELV source to comply with
CSA standard C22.2 No. 60950-1. Use the system with a SELV secondary source that is
electrically isolated from the AC source and that is grounded reliably.
The 7705 SAR-8 is safety certified according to CSA standard C22.2 No. 60950-1 by CSA.
To Next Page
Loading...
