System Management
7750 SR OS Basic System Configuration Guide Page 309
System Synchronization Commands
The following commands apply to the 7750 SR-7, and 7750 SR-12 models.
config
—system
— sync-if-timing
— abort
— begin
— bits
— interface-type {ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}]}
—no interface-type
— [no] shutdown
— commit
— ref-order first second [third]
—no ref-order
— ref1
— [no] shutdown
— source-port port-id
—no source-port
— ref2
— [no] shutdown
— source-port port-id
—no source-port
— [no]
The following commands apply to the 7750 SR-c12 models.
config
—system
— sync-if-timing
— abort
— begin
— commit
— ref-order first second [third]
—no ref-order
— ref1
— bits-interface-type {ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}]}
—no bits-interface-type
— [no] shutdown
— source-bits slot/mda
—no source-bits
— source-port port-id
—no source-port
— ref2
— bits-interface-type {ds1 [{esf | sf}] | e1 [{pcm30crc | pcm31crc}]}
—no bits-interface-type
— [no] shutdown
— source-bits slot/mda
—no source-bits
— source-port port-id
—no source-port
— [no]