Alcatel-Lucent ALE M3 - Page 180

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
180
• Step 3: Save the change and place this file on the provisioning server.
11.16.3 Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
Parameter
SettingCustomSoftkeyEnable
config.xml
Description
It enables or disables the custom softkey layout feature.
Permitted
Values
false - disable
true - enable
Default
false
Web UI
WEB → Settings → Softkey Layout → Custom Softkey
Parameter
SettingCustomSoftkeyStateList
config.xml
Description
It configures the desired call state to apply the custom softkey layout.
Note: Multiple call states are separated by commas. It works only if
“SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Blank - all call states will use the custom softkey layout)
Dial - Dial state
DialEmpty - DialEmpty state
TransDial - TransDial state
TransDialEmpty - TransDialEmpty state
ConfDial - ConfDial state
ConfDialEmpty - ConfDialEmpty state
Calling - Calling state
Transferring - Transferring state
CallFailed - CallFailed state
Ringing - Ringing state
NewCallin - NewCallin state
ConfNewCallin - ConfNewCallin state
Conversation - Conversation