Alcatel-Lucent ALE M3 - Page 181

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
181
Hold - Hold
Held - Held
Conf - Conf
ConfHold - ConfHold
BeTrans - BeTrans
Paging - Paging
Listening - Listenning
Default
Blank
Parameter
SettingCustomSoftkeyDynamicEnable
config.xml
Description
It enables or disables the phone to display the soft keys relevant to the features (call
center, centralized call recording, and executive-assistant).
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
false - disable
true - enable
Default
true
Parameter
SettingCustomSoftkeyDialUrl
config.xml
Description
It configures the access URL of the custom softkey layout file in the Dial state.
The states that the XML file contains: Dial; DialEmpty; TransDial; TransDialEmpty;
ConfDial; ConfDialEmpty
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
SettingCustomSoftkeyCallOutUrl
config.xml
Description
It configures the access URL of the custom softkey layout file in the Callout state.
The states that the XML file contains: Calling; Transferring
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
SettingCustomSoftkeyCallFailedUrl
config.xml
Description
It configures the access URL of the custom softkey layout file in the Callfailed state.
The state that the XML file contains: CallFailed
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
SettingCustomSoftkeyCallInUrl
config.xml