Alcatel-Lucent ALE M3 - Page 182

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
182
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
The states that the XML file contains: Ringing; NewCallin; ConfNewCallin
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
SettingCustomSoftkeyTalkingUrl
config.xml
Description
It configures the access URL of the custom softkey layout file in the Taking state.
The states that the XML file contains: Conversation; Hold; Held; Conf; ConfHold;
BeTrans; Paging; Listenning
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
SettingCustomSoftkeyDial
config.xml
Description
It configures custom Softkey in the Dial state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Call
Backspace
IME
Cancel
Directory
History
Blank - String within 511 characters
Default
M3/M5/M7: Call;Backspace;IME;Cancel
M8: Call;Directory;Backspace;IME;Cancel
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyDialEmpty
config.xml
Description
It configures custom Softkey in the DialEmpty state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Directory;History;IME;Cancel;Empty
String within 511 characters
Default
M3/M5/M7: Directory;Empty;IME;Cancel
M8: Directory;Emoty;Empty;IME;Cancel
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyTransDial
config.xml
Description
It configures custom Softkey in the TransDial state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).