Installing the OmniAccess 780
Left running head:
Chapter name (automatic)
42
Beta Beta
OmniAccess 780 Hardware Users Guide
Alcatel-Lucent
C
ONNECTING AC INPUT POWER
Warning: When installing the system, the ground connection must always be made first and
disconnected last.
Figure 14: Connecting Power Cord
• Use the specified power cord to power your system.
• Connect the system end of the connector to the OA-780, as shown in above
figure.
• Connect the power plug to the utility power socket.
• Be sure that the power cable is not left in a hazardous position that may restrict
movement of personnel or that may fray due to movement of other equipment
near the system.
OA7-PS-AC
To Next Page
Loading...