Installing the OmniAccess 780
Left running head:
Chapter name (automatic)
46
Beta Beta
OmniAccess 780 Hardware Users Guide
Alcatel-Lucent
PARTS REQUIRED
The following tools and parts are required to rack-mount the OA-780:
• AC power supply unit
• One 6-gauge ground cable
• Two hex nuts and M4 screws
• Four 10-32 x 3/8-inch slotted screws
• 3/8-inch nut driver
• No. 2 Phillips screwdriver
• 1/4-inch flat-blade screwdriver
• Cable ties, if necessary
To Next Page
