Starting the OmniAccess 780
Left running head:
Chapter name (automatic)
64
Beta Beta
OmniAccess 780 Hardware Users Guide
Alcatel-Lucent
Step 12: Enable HTTP & HTTPS for web-based management.
• HTTP is the primary protocol used for the transfer of files over the World Wide
Web. You can access the OA-700 using HTTP through a web browser after being
authenticated.
http {enable|disable}
Example:
ALU(config)# http enable
• HTTPS, in addition to the normal HTTP uses SSL encryption for secure
transmission of files.
Example:
ALU(config)# https enable
Note: SSH and HTTPS are not supported in the no crypto image. For information on the no
crypto release, refer to the release note.
Step 13: Enable Modem for Out of Band Management.
modem {enable|disable}
Example:
ALU(config)# modem enable
Step 14: Show Chassis - The ‘show chassis’ command provides a physical
inventory of the running chassis components for a specific slot or for the entire
system.
Example:
ALU(config)# show chassis
Physical inventory at Thu Dec 11 19:06:36 2008
System started approximately Thu Dec 11 18:32:42 2008
Uptime is 0 days 0 hours 35 minutes 0 seconds
USP - Universal serial port card (active)
Slot number: 0
Part number: 902605-90
Manufacturer: ALU
Description: Universal serial port card
Serial number: WL0549000441
Version: 01
Revision: A00
LoL firmware version: 2.2.68
Loader version: 2.33
ALU-OS version: 2.3.1.30
MDC
Serial number: WL0544000288
Revision: A00
Version: 01
SE - Services engine (active)
Slot number: 3
Part number: 902601-90
Manufacturer: ALU
Description: Services engine
To Next Page
Loading...