Alcatel Router - Show Policy As_Path

100 Chapter : BGP4 show Commands
Router User Guide
show policy as_path
This command displays the AS path access lists.
parameter definition
syntax:
show policy as_path [ access_list < n > ]
example:
Alcatel-host> show policy as_path
screen display example
related commands
applicable systems:
All models:
access_list The access list number.
The range is 1 - 199.
show policy community_list
show policy ip_access_list
show policy route_map
> show policy as_path
AS path access list 1
permit .* 699 .*
permit .* 500
deny 40 .*
AS path access list 2
deny 60.*
>