194 Chapter : RIP Configure Commands
Router User Guide
configure router rip interface split_horizon
This command configures the split-horizon mechanism on an interface.
By default, split horizon is enabled for all interfaces for poison-reverse.
parameter definition
syntax:
[ no ] split_horizon < none | simple | poison >
example:
Alcatel-host/configure/router/rip/interface ethernet0> split_horizon simple
This example configures interface Ethernet 0 to do simple split-horizon.
related commands
applicable systems:
All models.
splitval Split horizon algorithm
none
Disables split horizon.
simple
Enables split horizon.
poison
Enables poison reverse (default)
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
To Next Page
Loading...
