Alcatel Router - Configure Router Ospf Area

# Running H/F 2
Router User Guide
configure router ospf area
This command configures an OSPF area.
parameter definition
syntax:
area < area_id >
example:
Alcatel-host/configure/router/ospf> area 0
next-level commands
related commands
applicable systems:
All models.
area_id OSPF area id
Enter either a decimal number or an IP address.
configure router ospf area area_type
configure router ospf area default_cost
configure router ospf area range
configure router ospf area virtual_link
configure router ospf 1583Compatibility
configure router ospf distance
configure router ospf interface
configure router ospf redistribute
configure router ospf ref_bw
configure router ospf timers