Alcatel Router - Configure Router Ospf Interface Hello_Interval

# Running H/F 2
Router User Guide
configure router ospf interface hello_interval
This command sets the time interval, in seconds, between the hello packets that are sent on the
interface.
parameter definition
syntax:
[ no ] hello_interval < n >
example:
Alcatel-host/configure/router/ospf/interface toBoston> hello_interval 30
related commands
applicable systems:
All models.
hello_interval Time in seconds
The default is 10; the range is 1 - 65535.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay