Alcatel Router - Configure Policy Route_Map Set Distance

32 Chapter : Policy Commands
Router User Guide
configure policy route_map set distance
This command sets the BGP protocol preference for the path attribute.
parameter definition
syntax:
[ no ] set distance distance < n >
example:
Alcatel-host/configure/policy/route_map Block100 1> set distance 20
related commands
applicable systems:
All models.
distance Default preference value
The range is 0 - 255.
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set local_preference
configure policy route_map set metric
configure policy route_map set metric_type
configure policy route_map set origin