Alcatel Router - Configure Router Ospf Area Default_Cost

Running H/F 2 #
Router User Guide
configure router ospf area default_cost
This command specifies a cost for the default summary route sent into a stub area.
parameter definition
syntax:
default_cost < n >
example:
Alcatel-host/configure/router/ospf/area 1> default_cost 10
related commands
applicable systems:
All models.
default_cost Enter a number.
The range is 0 - 16777215; the default is 1.
configure router ospf area area_type
configure router ospf area range
configure router ospf area virtual_link