Alcatel Router - Configure Router Rip Interface Metric

190 Chapter : RIP Configure Commands
Router User Guide
configure router rip interface metric
This command configures the metric value for RIP routes for this interface.
parameter definition
syntax:
[ no ] metric < n >
example:
Alcatel-host/configure/router/rip/interface ethernet0> metric 3
This example configures the RIP routes metric for interface Ethernet 0 to 3.
related commands
applicable systems:
All models.
metric Default metric
The range is 1 - 4294967294; the default is 1.
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon