Alcatel Router - Configure Router Ospf Area Virtual_Link Transmit_Delay

# Running H/F 2
Router User Guide
configure router ospf area virtual_link transmit_delay
This command configures the estimated time to transmit a link state update packet on an interface.
parameter definition
syntax:
[ no ] transmit_delay < n >
example:
Alcatel-host/configure/router/ospf/area 1/virtual_link 100.10.1.5> transmit_delay 1
related commands
applicable systems:
All models.
transmit_delay The time in seconds.
Link state advertisements in the update packet are aged by this amount prior to
transmission.
The range is 1 - 65535; the default is 1.
The value must be greater than zero.
configure router ospf area virtual_link authentication
configure router ospf area virtual_link dead_interval
configure router ospf area virtual_link hello_interval
configure router ospf area virtual_link retransmit_interval