Alcatel Router - clear ip bgp

36 Chapter : Policy Commands
Router User Guide
configure policy route_map set origin
This command configures the origin value for the BGP route.
parameter definition
syntax:
[ no ] set origin origin < egp | igp | incomplete >
example:
Alcatel-host/configure/policy/route_map Block100 1> set origin igp
next-level commands
applicable systems:
All models.
origin
egp
EGP protocol
igp
IGP protocol
incomplete
Unknown protocol type
configure policy route_map set origin egp
configure policy route_map set origin igp
configure policy route_map set origin incomplete