Alcatel Router - Configure Policy Route_Map Set Metric

34 Chapter : Policy Commands
Router User Guide
configure policy route_map set metric
This command configures the metric value for the destination routing protocol.
parameter definition
syntax:
[ no ] set metric metric < n >
example:
Alcatel-host/configure/policy/route_map Block100 1> set metric 120
related commands
applicable systems:
All models.
metric Metric value
The range is 1 - 4294967294.
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set distance
configure policy route_map set local_preference
configure policy route_map set metric_type
configure policy route_map set origin