Alcatel Router - Show Ip Ospf Area

150 Chapter : OSPF Show Commands
Router User Guide
show ip ospf area
This command displays configuration information about an OSPF area.
parameter definition
syntax:
area [ area_id ]
example:
Alcatel-host> show ip ospf area 1
screen display example
related commands
applicable systems:
All models.
area_id OSPF area ID
Enter either a decimal number or an IP address.
show ip ospf global
show ip ospf database
show ip ospf interface
show ip ospf neighbor
show ip ospf retransmission_list
show ip ospf request_list
show ip ospf virtual_links
> show ip ospf area_id 1
Area 1
Number of interfaces in this area is 0
Area type is NORM
SPF algorithm executed 1 times
No area ranges defined
>