Alcatel Router - Configure Router Ospf Interface Transmit_Delay

# Running H/F 2
Router User Guide
configure router ospf interface transmit_delay
This command configures the approximate time it takes to transmit a link state advertisement update
packet on the interface.
parameter definition
syntax:
[ no ] transmit_delay < n >
example:
Alcatel-host/router/ospf/interface toBoston> transmit_delay 3
related commands
applicable systems:
All models.
seconds Time in seconds.
Usage of this command is most appropriate for low speed links.
The range is 1- 65535; the default is 1.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval