Alcatel Router - Configure Router Ospf Interface Cost

# Running H/F 2
Router User Guide
configure router ospf interface cost
This command configures the OSPF metric cost for a specific interface.
parameter definition
syntax:
[ no ] cost < n >
example:
Alcatel-host/configure/router/ospf/interface toBoston> cost 10
related commands
applicable systems:
All models.
cost Metric cost of sending packets on a particular OSPF interface.
The range is 1 - 65535; the default is computed based on the interface bandwidth.
configure router ospf interface authentication
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay