Chapter : BGP4 Configure Commands 53
Router User Guide
configure router bgp always_compare_med
This command configures a router to allow the comparison of the multi-exit discriminator for paths
from neighbors in different autonomous systems.
Normally, MED comparison is done on paths within the same autonomous system. This command
allows the comparison to be made for paths received from other autonomous systems.
syntax:
[ no ] always_compare_med
example:
Alcatel-host/configure/router/bgp 10> always_compare_med
related commands
applicable systems:
All models.
configure router bgp aggregate_address
configure router bgp distance
configure router bgp default_metric
configure router bgp group
configure router bgp neighbor
configure router bgp redistribute
To Next Page
Loading...
