Chapter : BGP4 Configure Commands 79
Router User Guide
configure router bgp neighbor timers
This command configure keepalive timers for a neighbor (peer).
The holdtime timer value is calculated as three times the value of the keepalive timer.
parameter definition
syntax:
[ no ] timers keepalive < n >
example:
Alcatel-host/configure/router/bgp 10/neighbor 101.101.1.2 4> timers 120
applicable systems:
All models.
keepalive The keepalive interval
The range is 2 - 21845; the default is 60.
To Next Page
Loading...
