Alcatel Router - BGP4 Clear Commands

Chapter : Policy Commands 35
Router User Guide
configure policy route_map set metric_type
This command configures the metric type for a route.
parameter definition
syntax:
[ no ] set metric_type type < internal >
example:
Alcatel-host/configure/policy/route_map Block100 1> set metric_type internal
related commands
applicable systems:
All models.
type Internal
internal
Use the IGP metric as the MED for BGP.
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set distance
configure policy route_map set local_preference
configure policy route_map set metric
configure policy route_map set origin