Alcatel Router - Configure Router Ospf Redistribute Connected

Running H/F 2 #
Router User Guide
configure router ospf redistribute connected
This command redistributes connected interface routes.
parameter definition
NOTE: See policy commands, specifically “configure policy route_map” on page 23 for more
information about configuring route maps.
syntax:
redistribute connected [ metric < n > ] [ < metric_type < n > ] [ route_map < name > ]
[ tag < n > ]
example:
Alcatel-host/configure/router/ospf> redistribute connected
related commands
applicable systems:
All models.
metric OSPF default metric
The range is 0 - 16777214; the default is 100.
metric_type Ospf exterior metric type for redistribution
The range is 1 - 2; the default is 2.
route_map Pointer (name or word) to route map entries
tag 32-bit tag value
The range is 0 - 2147483647; the default is 0.
configure router ospf redistribute bgp
configure router ospf redistribute rip
configure router ospf redistribute static