Alcatel Router - Configure Router Ospf Area Virtual_Link

Running H/F 2 #
Router User Guide
configure router ospf area virtual_link
This command defines an OSPF virtual link for an area.
Establishes a virtual connection to the backbone for an area border router that is not physically
connected to the backbone. A virtual link requires that each virtual link neighbor must include the
transit area ID and the virtual link neighbor’s router ID.
parameter definition
syntax:
[ no ] virtual_link < IP address >
example:
Alcatel-host/configure/router/ospf/area 1> virtual_link 100.10.1.5
next-level commands
applicable systems:
All models.
virtual_link IP address for the virtual link.
Enter an IP address.
configure router ospf area virtual_link authentication
configure router ospf area virtual_link dead_interval
configure router ospf area virtual_link hello_interval
configure router ospf area virtual_link retransmit_interval
configure router ospf area virtual_link transmit_delay