Alcatel Router - Configure Router Ospf Area Range

# Running H/F 2
Router User Guide
configure router ospf area range
This command summarizes routes at the area boundaries, producing a single route that is advertised
by area border routers.
parameter definition
syntax:
[ no ] range networknumber < IP address > mask < netmask >
[ advertise_enum < advertise | not_advertise > ]
example:
Alcatel-host/configure/router/ospf/area 0> range 100.1.0.0 255.255.0.0 advertise
related commands
applicable systems:
All models.
networknumber IP address
mask netmask
advertise_enum
advertise
Advertise this range.
not_advertise
Do not advertise this range.
configure router ospf area_type
configure router ospf area default_cost
configure router ospf area area virtual_link