Alcatel Router - Configure Router Ospf Area Virtual_Link Retransmit_Interval

Running H/F 2 #
Router User Guide
configure router ospf area virtual_link retransmit_interval
This command configures the time between link state advertisement retransmissions on an interface.
parameter definition
syntax:
[ no ] retransmit_interval < n >
example:
Alcatel-host/configure/router/ospf/area 1/virtual_link 100.10.1.5> retransmit_interval 5
related commands
applicable systems:
All models.
retransmit_interval The time in seconds.
The configured value must be greater than the expected round-trip delay.
The range is 1 - 65535; the default is 5.
configure router ospf area virtual_link authentication
configure router ospf area virtual_link dead_interval
configure router ospf area virtual_link hello_interval
configure router ospf area virtual_link transmit_delay