Alcatel Router - Configure Router Rip Interface Passive

Chapter : RIP Configure Commands 193
Router User Guide
configure router rip interface passive
This command configures RIP mode for a specific interface to passive (listen-only) mode.
Use this command to override a global RIP mode configured for an interface.
syntax:
[ no ] passive
example:
Alcatel-host/configure/router/rip/interface ethernet1> passive
This example configures interface Ethernet 1 to listen-only mode.
related commands
applicable systems:
All models.
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface split_horizon