Alcatel Router - Configure Policy Community_List Standard_Community

20 Chapter : Policy Commands
Router User Guide
configure policy community_list standard_community
This command configures a standard community list as part of the routing policy.
parameter definition
syntax:
[ no ] policy community_list standard_community community_list < n > community_index < n >
action < deny | permit > [ community < n > ] [ generate_local_as < local_as > ]
[ aa_nn < n > ] [ generate_no_advertise <no_advertise > ] [ generate_no_export
< no_export > ]
example:
Alcatel-host/configure> policy community_list standard_community 90 150 permit community
40 45 local_as aa_nn 655:232592 no_advertise
example:
Alcatel-host/configure/policy> community_list standard_community 90 150 permit community
42949672 no_advertise
applicable systems:
All models.
community_list Extended community list number
The range is 100 - 199.
community_index Community index number
The range is 0 - 65535.
action
deny
Specify a community to reject.
permit
Specify a community to permit.
community A list of community numbers
The range is 1 - 4294967295.
This list can contain a maximum of 32 numbers.
generate_local_as
local_as
Do not send out local AS.
aa_nn Community number in aa_nn format
This list can contain a maximum of 32 numbers.
generate_no_advertise
no_advertise
Do not advertise to any neighbor.
generate_no_export
no_export
Do not send to next AS