Alcatel Router - Configure Policy Route_Map Set Local_Preference

Chapter : Policy Commands 33
Router User Guide
configure policy route_map set local_preference
This command configures the BGP local preference path attribute.
parameter definition
syntax:
[ no ] set local_preference local_preference < n >
example:
Alcatel-hostconfigure/policy/route_map Block100 1> set local_preference 50
related commands
applicable systems:
All models.
local_preference Preference value
The range is 1 - 4292967294.
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set distance
configure policy route_map set metric
configure policy route_map set metric_type
configure policy route_map set origin