Alcatel Router - Configure Router Rip Interface Mode

Chapter : RIP Configure Commands 191
Router User Guide
configure router rip interface mode
This command configures RIP mode for the specific interface.
This command is similar to the global RIP mode command, but it is only applicable to the current
interface. Use this command to override the global RIP mode settings.
parameter definition
syntax:
[ no ] mode < n >
example:
Alcatel-host/configure/router/rip/interface ethernet0> mode 1
This example configures interface Ethernet 0 for RIP version 1.
related commands
applicable systems:
All models.
mode Enter a mode value.
1
RIP version 1
2
RIP version 2 (default)
3
RIP version 2 (V1 compatible)
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon