Alcatel Router - Configure Router Ospf Interface Priority

# Running H/F 2
Router User Guide
configure router ospf interface priority
This command configures the priority (which is used in the election of designated routes) to establish
the designated router.
parameter definition
syntax:
[ no ] priority < n >
example:
Alcatel-host/configure/router/ospf/interface toBoston> priority 5
related commands
applicable systems:
All models.
priority Number that specifies the router priority.
This is only used in non point-to-point networks.
The range is 0 - 255; the default is 1.
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface neighbor
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay