Alcatel Router - Default Route Preference (Administrative Distance) Values; Configure Router Rip Distance

186 Chapter : RIP Configure Commands
Router User Guide
configure router rip distance
This command configures the distance value for RIP protocol on a router.
parameter definition
syntax:
distance < n >
example:
Alcatel-host/configure/router/rip> distance 25
related commands
applicable systems:
All models.
distance Distance value (enter a number)
The range is 1 - 255; the default is 100.
Table 19 Default Route Preference (Administrative Distance) Values
How Route is Learned Default
Preference
Command to Modify Default Preference
Directly connected network 0 Not configurable.
Static 1 Not configurable.
OSPF internal route 10 configure router ospf distance ospf non_external
RIP 100 configure router rip distance
Generated or aggregate 130 Applicable to BGP only, and is not configurable.
OSPF AS non-external route 150 configure router ospf distance ospf external
BGP 170 configure router bgp distance
configure router rip default_metric
configure router rip interface
configure router rip mode
configure router rip pacing
configure router rip passive
configure router rip redistribute
configure router rip timers