©2019 ALL-TEST Pro, LLC All Rights Reserved 8 Rev 06/20/2019
ALL-TEST PRO 7™ SERIES TEST KIT
AVAILABLE ACCESSORIES
• Soft carrying pouch for instrument and test leads
• Optional smaller sized Kelvin Clips
Test Lead Connections
The AT7 series instruments use specially designed
test leads and clips to provide accurate
measurement of the low resistance values typically
associated with coil windings. The test leads are
also shielded to prevent “hum” or other electrical
interference that can result in erratic readings for
DF and C.
(See specifications section for measurement
ranges and accuracies)
• 3x Test Leads with heavy duty Kelvin Clips
and push-pull connectors
• 1x Test Lead with 4mm safety plug and
MC “Dolphin” clip
• Charging adapter, Universal input type
100-240VAC, output 9VDC @ 1.7A
• Software download certificate (dongle if
AT7P has been purchased)
• 1x USB cable 1m
• Durable and rugged hard case with pre-
cut foam liner
• User Manual
• Warranty: 1 year limited; Optional 2
years available with calibration
To Next Page
