Publication 1734-UM002C-EN-P - July 2003
Configuring the 1734-ADN(X) Adapter’s SubNet 4-7
The screens below show the remaining configuration tabs.
This completes the configuration options. Your adapter must go
online for configuration changes to take effect.
You cannot change any
configuration parameters on
this screen. It is shown here
to maintain the software’s
graphical integrity.
Click here when finished setting
configuration parameters.
IMPORTANT: Configuration changes
made in offline mode
do not take effect until
the scanner goes
online. For more
information on how
the scanner goes
online, see page 4-8.
Use this screen to choose
Automatic Device
Replacement options.
You must have loaded each
device into RSNetWorx for
DeviceNet before loading
using this button.
To Next Page
Loading...
Need help?
General
